M18 FUEL HIGH-TORQUE IMPACT WRENCHES W/ONE-KEY
THE M18 FUEL HIGH-TORQUE IMPACT WRENCHES W/ONE-KEY from Milwaukee Tool deliver up to 1400 ft.-lb. of torque and is capable of removing fasteners over two times faster. One-Key Tool Customization gives users access to a range of predetermined setups such as custom drive control, lug nut mode and concrete anchor mode. In the concrete anchor mode, the tool will automatically shut down once the anchor is seated to reduce broken anchors and stripped material. One-Key Integrated Tool Tracking allows users to identify where and when their impact wrench was last seen.
AVT ROTARY HAMMER
THE AVT ROTARY HAMMER from Makita has up to 89% less vibration than the previous model with no compromise to impact energy. It is engineered with enhanced anti-vibration technology that includes an air-actuated counterbalance, a vibration-absorbing housing and an integrated damper spring. It features a powerful 19 amp motor, soft start control and two modes of operation for either "chipping only" or "hammering with rotation."
8V MAX IMPACT SCREWDRIVER
THE 8V MAX IMPACT SCREWDRIVER from Porter-Cable is for smaller fastening applications. Just 6.48" long and weighing 1.42 lb., the tool is easily maneuverable while delivering 0-2,200 rpm and 125 in.-lb. of nonreactionary torque. It features a quick-load chuck for one-handed bit loading and release, an LED light that illuminates the work area, and a magnetic bit tip holder. It uses a lithium-ion battery that can hold a charge for up to 18 months.
TURBOSHEAR DRILL ATTACHMENT
THE TURBOSHEAR DRILL ATTACHMENTS from Malco feature a versatile hex shank drive shaft that fits a broad range of 1/4" to 1/2" drills. This expanded compatibility also includes impact drivers with 1/4" quick release chucks. Attachments are available for cutting sheet metal, asphalt shingles, fiber cement siding, backer-board, roofing slate and more.
HDS183 18V EC BRUSHLESS COMPACT TOUGH 1/2" HAMMER DRILL/DRIVER
Robert Bosch Tools
THE HDS183 18V EC BRUSHLESS COMPACT TOUGH 1/2" HAMMER DRILL/DRIVER from Bosch features kickback control, an integrated acceleration sensor that virtually stops the drill's rotation during bit bind-up situations. The efficient EC brushless motor provides longer tool life, greater runtime and helps reduce maintenance. A built-in LED offers improved visibility in dark work areas. A heavy-duty, all-metal chuck has great gripping power for better torque transfer. The tool can deliver 531 in.-lb. of torque and two drilling speeds (0-1,900 rpm high speed; 0-600 rpm for torque). It offers 20+1 clutch settings to reduce fastener damage.
Robert Bosch Tools
20V MAX BRUSHLESS HIGH TORQUE IMPACT WRENCHES
THE 20V MAX BRUSHLESS HIGH-TORQUE IMPACT WRENCHES from DeWalt are available in 1/2" hog ring or detent pin anvils, 3/4" hog ring with retention pin hole anvil and a 7/16" quick release chuck specifically designed for utility operations. The 1/2" impact wrench delivers 700 ft.-lb. of max torque and 1,200 ft.-lb. of max breakaway torque. The tools are 8.9" long and weigh just 7 lb., making them comfortable to use over long periods.