HD CLEAR HEAVY DUTY PVC CEMENT
HD CLEAR HEAVY DUTY PVC CEMENT by J.C. Whitlam is suitable as a one-step cement for joining PVC drain, waste and vent pipe and fittings in nonpressure applications. It is a quick-setting, low-VOC, drip-free clear cement for PVC pipe and fittings up to a diameter of 6”, and recommended for potable water, pressure pipe and conduit. Recommended temperature range from 10° F to 120° F. Meets ASTM D2564. Available in 1/4 pint, 1/2 pint, 1 pint and 1 quart dauber top cans, and 1 gal. metal can with handle.
J.C. Whitlam Mfg.
GEOSYNC WATER-TO-AIR GEOTHERMAL HEAT PUMP
Modine Mfg. Co.
THE GEOSYNC WATER-TO-AIR GEOTHERMAL HEAT PUMP from Modine is a high-efficiency forced-air heating and cooling solution for residential and light commercial applications. The unit is available in 2-ton to 6-ton options, which include standard features such as CF microchannel air coil, Modine’s control system, Decstar blower with integrated EC motor, 4” MERV 11 filters and a vertical control panel with high and low voltage sections.
Modine Mfg. Co.
MODEL 88 SECTIONAL DRAIN CLEANER
THE MODEL 88 SECTIONAL DRAIN CLEANER from General Pipe Cleaners features a 3/4 horsepower motor, a safety clutch, air-actuated power switch, ground fault circuit interrupter, folding handle, 10” wheels and cable feeding tool as standard equipment. The heavy-duty motor drives a 3.5-to-1 ratio gear head to handle difficult jobs. It spins 8’ or 10’ quick-coupling cable sections at distances of 200’ or more. Chain or spring center cables are available. The chain combines strength and flexibility, while the inner spring can handle greater torque.
General Pipe Cleaners
SANICOM 1 SIMPLEX DRAIN PUMP
THE SANICOM 1 SIMPLEX DRAIN PUMP pumps gray water away from demanding commercial applications such as commercial dishwashers, washing machines and other heavy-duty wastewater applications. It includes a rubber discharge elbow that adapts to the discharge pipe and can be rotated 360 degrees, as well as a nonreturn valve. It can discharge gray water up to 25’ vertically, 250’ horizontally or a combination of both. The 1-HP motor and a nonclogging impeller design allow the unit to pass laundry lint and other small solids up to 3/8” in diameter.
DEB200 INNER/OUTER DEBURRING TOOL
THE DEB200 INNER/OUTER DEBURRING TOOL from Reed deburrs and reams the inner and outer diameters using one tool. This double-ended deburring tool works for copper, aluminum, steel and stainless tubing from 3/8” to 2” (10-54 mm) ID/OD. Multiple cutting edges on the inside of either end provide smooth deburring operation. Knurled rings on the surface allow a firm grip during use. The tool is used for copper pipe installation, as well as with metal pipe for water service lines, plumbing lines, radiant heating and gas lines.
ISOLATOR E-X-P SERVICE VALVE KITS WITH PRO-CONNECT PUSH
THE ISOLATOR E-X-P SERVICE VALVE KITS WITH PRO-CONNECT PUSH from Webstone allow for quicker, consistent quality tankless water heater installations with fewer leak paths. The push-connect ends provide fully removable connections to copper, CPVC or PEX for cleaning, flushing or diagnosing problems. Products are in stock for immediate shipment. Made with lead-free CleanBrass and certified to meet all low-lead laws.