EVERLOC+ COMPRESSION-SLEEVE FITTING SYSTEM
THE EVERLOC+ COMPRESSION-SLEEVE FITTING SYSTEM from REHAU adds new sizes going up to 2” diameter to address plumbing and hydronic piping requirements in the commercial and multifamily sectors. The polymer and lead-free brass fittings feature four sealing edges and a textured PEXa compression sleeve for a tight, secure grip. Connections are easily made using a consistent, two-step expansion/compression process, after which they are immediately ready for pressure testing. System includes flexible, strong and durable RAUPEX pipe. Because fewer connections are required, additional savings are realized with regard to time, labor and material.
PEX PRODUCT EXPANSION
THE PEX PRODUCT EXPANSION from Webstone includes 40 new SKUs with F1960 or F1807 PEX connections. All new products include thermostatic mixing valves, Press x PEX transitional ball valves, as well as the company’s exclusive Isolator uni-flange ball valves, Isolator E-X-P tankless water heater valves and Pro-Pal Ball Drain.
PRE-INSULATED PEX PIPE
PRE-INSULATED PEX PIPE from Uponor is available in insulation thicknesses up to 2" to comply with the ASHRAE 90.1-2013 Energy Code and the 2012 International Energy Conservation Code. The new offering includes both the company's AquaPEX pipe for potable plumbing applications as well as Wirsbo hePEX oxygen-barrier pipe for hydronic heating and cooling applications. The entire offering is available in coil lengths of 50', 75' or 100' with manufactured seams running the length of the coil, providing greater installation efficiencies by eliminating the need for solvents, glues or tape during the installation process.
PEX BALL VALVES
THESE PEX BALL VALVES from Legend are constructed of no-lead DZR forging brass to meet ASNI/NSF 61-G, ANSI/NSF 14, ASTM F1807 requirements. The valves feature dual EPDM O-ring stem seals and zinc-plated handles. Models include the T-2006NL PEX x PEX (ASTM F 1807) ball valve in sizes 1/2" to 2", and the T-1960NL PEX x PEX ball valve in sizes from 1/2" to 1". The valves have F190 cold-expansion PEX ends.
POTABLE PEXA PLUMBING SYSTEM
THIS POTABLE PEXA PLUMBING SYSTEM from MrPEX is offered in red, white and blue pipe, in coils or sticks, with a complete line of accessories and tools. The company offers lead-free brass F1807 and PPSU F2159 fittings using stainless steel and PEX press sleeve, and are also approved for use with F1960 fittings.
F1960 POLY PEX COLD EXPANSION FITTINGS
F1960 POLY PEX COLD EXPANSION FITTINGS from Matco-Norca are for use in hot and cold water distribution systems. Molded from RADEL resin, the fittings are lead-free and available in a wide range of configurations including couplings, elbows, male adapters, tees and rings with stops, all in various sizes. The fittings comply with ASTM F1960 specification for cold expansion fittings and PEX reinforcing rings. They have a maximum temperature rating of 320° F and a maximum working temperature/pressure of 210° F at 150 psi.